Skip to main content

Unloading system

Machined parts are unloaded directly from the machining area (between wheels).
  • The part storage, after the unloading system, occurs outside of the enclosure
  • Built in-house or third-party systems
  • It loads one or more machines
Occupied floor space
(Un)loading time
Part size
Number of auxiliary stations
Standard options
S type conveyor

Belt fixed to the workrest blade, which unloads parts into a drawer or a similar accumulation system.

The belt is fixed to the floor outside the machine, which unloads parts into the drawer or a similar accumulation system. A post-process measurement system can be used.

Storage and auxiliary systems
Step-by-step conveyor belt with spacers

Parts are normally transported horizontally. There are spacers to separate parts.

The system helps to slowly unload and accumulate the ground parts. Normally located at the end of the unloading system.

Pallet feeding system, with or without a trolley, is loaded manually in the tower.

The part is measured before and/or after machining operations.

The part is dried and cleaned using high pressure air.

What level of automation do you need?

Find more feeding and storage systems

What other operations do you need to automate?

Add different auxiliary stations

Select region, country and language