EV reducer shaft
Depending on your manufacturing process, our centerless machines might be best. Or perhaps our cylindrical grinders? We will work in close collaboration with you to find the best solution.
As a single supplier, we provide solutions for a wide range of canning parts
As a single supplier, we provide solutions for a wide range of canning parts
We provide high precision and cost-effective grinding and hard turning solutions for a wide range of canning parts: from ironing and redraw dies, to knock-outs and punches. Want to know more about our solutions?
You may also be interested in
Do you need to hold diameter, roundness, and TIR to within 0.00008" (2 µm) in large parts that weight up to 500 kg?
Are you also interested in:
* Increasing productivity with multiple operations in one cycle?
* More flexibility due to our B0 axis?
The ILD machine…
Deciding whether to finish a part with grinding or hard turning is difficult and often counterintuitive. Both can achieve extremely high tolerances and surface finishes.
It would be nice if there were a clear set of standards to determine whether a part should be hard turned or ground.…
Since the first CG was manufactured in 2000, it has been used for high-production grinding.
Large manufacturers in the automotive industry, leading companies in the cutting tools sector, and manufacturers of all types of transmissions are today grinding with CG machines.
In 2020…
More than 50 years mastering hydrostatic technology
More than 50 years mastering hydrostatic technology
Watch this video to discover some application examples where hydrostatic technology is used and find out the advantages of applying it in a machine tool.
You may also be interested in
Precision is not simply the ability to machine a part accurately, but the capability to repeatably manufacture parts to exacting specifications over time.
There is no single feature that makes a machine capable of precision manufacturing, but rather a variety of factors working in…
Deciding whether to finish a part with grinding or hard turning is difficult and often counterintuitive. Both can achieve extremely high tolerances and surface finishes.
It would be nice if there were a clear set of standards to determine whether a part should be hard turned or ground.…
Finish hard turning is a great technology offering many advantages. The suitability of this process is, however, application dependent and therefore does not offer the same advantages to everyone.
This whitepaper explores the fundamentals of finish hard turning: what accuracies can be…
CG: The high-production grinding machine
CG: The high-production grinding machine
One of our customers that machines high precision parts for companies such as Siemens Gamesa shows the capabilities of new generation CG in action.
You may also be interested in
Many workpieces have emerged in the e-mobility industry, including the reducer shaft, rotor shaft and battery dies.
The search of the most efficient grinding solution for these workpieces is far from simple.
Although there are many variables to consider before arriving at the final…
Integrated measuring systems are devices for verifying the proper running of the machining process and guaranteeing accurate results with the utmost efficiency.
Yet certifying a measurement is not just the job of a gauge. Accuracy depends on the ability to integrate mechanics, machining…
There are many elements that go into building a truly accurate machine tool, and one that will maintain its accuracy over time.
There are a number of add-ons that can improve accuracy, but none can compensate for a design that is structurally unsound. It all starts with the base, one of…
Reliable and cost-effective sub-micron machining solutions for wind industry
Reliable and cost-effective sub-micron machining solutions for wind industry
The wind industry is under enormous pressure to reduce cost per MWh. They need to improve turbine designs, raise performance, and increase reliability – all while reducing maintenance costs. We have a solution for that.
You may also be interested in
Many workpieces have emerged in the e-mobility industry, including the reducer shaft, rotor shaft and battery dies.
The search of the most efficient grinding solution for these workpieces is far from simple.
Although there are many variables to consider before arriving at the final…
Integrated measuring systems are devices for verifying the proper running of the machining process and guaranteeing accurate results with the utmost efficiency.
Yet certifying a measurement is not just the job of a gauge. Accuracy depends on the ability to integrate mechanics, machining…
Precision is not simply the ability to machine a part accurately, but the capability to repeatably manufacture parts to exacting specifications over time.
There is no single feature that makes a machine capable of precision manufacturing, but rather a variety of factors working in…
The ILD range: high precision internal, external, face, and radius grinding for large workpieces up to 500 kg
The ILD range: high precision internal, external, face, and radius grinding for large workpieces up to 500 kg
Do you need to hold diameter, roundness, and TIR to within 2 µm in large parts that weight up to 500 kg? If so, the ILD may be the solution you are looking for.
You may also be interested in
In 1969 Hembrug launched its first machine with a hydrostatic main spindle. IBM requested the turning of memory discs with 0,5 µm high-precision form and 0,025 µm Ra surface finish.
Since Hembrug’s conventional lathes did not achieve this accuracy, a special machine with an in-house…
Since the first CG was manufactured in 2000, it has been used for high-production grinding.
Large manufacturers in the automotive industry, leading companies in the cutting tools sector, and manufacturers of all types of transmissions are today grinding with CG machines.
In 2020…
Precision is not simply the ability to machine a part accurately, but the capability to repeatably manufacture parts to exacting specifications over time.
There is no single feature that makes a machine capable of precision manufacturing, but rather a variety of factors working in…